 |
| Name: vacuum regulated system |
| Standards: 6m/min; 12m/min; 20m/min |
|
  |
| Name: foaming machine |
Standards: 1.vacuum intermittent type
foaming machine;
2.positive pressure intermittent type foaming machine;
3.vacuum continuous type foaming machine;
4.vacuum continuous and intermittent foaming machine
etc. |
|
 |
| Name: autoclave |
Standards: universal type：
φ300～φ800 |
| Characteristics It is suit for the products
which is only made a few or little batch, specially
for the aluminum hand-pattern's foaming forming. |
|
 |
| Name: foam making machine (big plate)
|
| Standards: universal type:1200×900×200；1200×900×150；1500×1000×200 |
| Characteristics: It is suit for the products
which is only made a few or little batch and difficult
or unnecessary to make aluminum hand-pattern's foaming
forming. It can lower pattern cost, and the casting's
developing cycle is shorted. |
|
  |
| Name: foam making machine (vertical
hydraulic)
|
| Standards: universal type: 1300×1000；900×800；1100×900 |
| Characteristics: It is suit for large
batch produce. The foam's measurements are accurate
and identical. |
|
 |
| Name: foam making machine (vertical hydraulic)
|
| Characteristics: stick foams together
with this machine. The stick place can be very exact
and fast. It can get lower the defect for mold shift
etc. |
|
  |
| Name: three-dimensional vibrating table |
| Standards: rubber spring vibrating table;
air spring vibrating table
|
| Characteristics: Rubber spring vibrating
table: It is mostly used on simple production line.
Air spring vibrating table: It can frequency and amplitude
modulation, mostly used on the assembly line. |
|
  |
| Name: three-dimensional vibrating table
& flask |
|
 |
| Name: hydraulic system |
|
 |
| Name: vacuum automatic open and close
device |
| Characteristics: It is always used on
the assembly line. |
|
 |
| Name: Rollover machine |
| Characteristics: It can lower labor intensity.
and molding sand would be put into sand preparing system
directly, so the dust pollute get lower. |
|
 |
| Name: molding department |
|
 |
| Name: Sand cooling system
|
| Characteristics: It can prepare sand 10(20,30,etc.)
tons per hour. The molding sand temperature would be
lower than 40℃ when gotten out from sand cooling system. |
|
 |
| Name: seethe type sand cooling system |
| Characteristics: It can prepare sand 10
tons very hour. |
|
 |
| Name: seethe type sand cooling system
|
| Characteristics: It can prepare sand 10
tons very hour |
|
 |
| Name: vibrating shakeout & conveyer
machine |
| Characteristics: It can prepare sand 20m3
very hour. And it is only used on the assembly line
|
|
 |
| Name: vibrating screen analysis system |
| Characteristics: It can conveyer sand
6 tons per hour. |
|
 |
| Name: water type dust collector |
|
 |
| NAME：ZY-2000 plenum & intermittent type
foaming equipment |
| Characteristics： suit for the bead of
EPS,EPMMA,STPMMA.Expecaly for lost foam casting product.
|
|
 |
| NAME：foaming equipment |
| Characteristics： suit for the bead of
EPS,EPMMA,STPMMA.Can be used for lost foam casting product
and some foam packing's making. |
|
 |
| NAME：Air spring three-dimensional vibrating
table |
| Characteristics： 1.the bigest power 7.5KW,vibrat
power 80KN,the heaviest sand case weight 8 TON; 2.vibrating
effect improve greatlly; 3.three-dimenstional vibrate
suit the casts with complexed mold cavity; 4.infinitely
variable speed, it can keep the foam pattern with no
brack during molding, and can gety the best vibrat effect;
5. It can automatic-locking and exactive-orientation,
so is suited to be used on lost foam product line.
|
|
 |
| NAME：Air spring three-dimensional vibrating
table |
| Characteristics：1.the bigest power 7.5KW,vibrat
power 80KN,the heaviest sand case weight 8 TON; 2.vibrating
effect improve greatlly; 3.three-dimenstional vibrate
suit the casts with complexed mold cavity; 4.infinitely
variable speed, it can keep the foam pattern with no
brack during molding, and can gety the best vibrat effect;
|
|
